< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1960565434855160&ev=PageView&noscript=1" />

Dry Ice Blasting Machines: How They Work, What They Clean, and How to Choose

Need to strip carbon, grease or paint without water, chemicals or a full teardown? A dry ice blasting machine can do that. But will it suit your parts, and which model fits?

How does dry ice blasting work? The short answer: compressed air fires −78.5 °C CO₂ pellets at the dirty surface. The pellets crack the coating, lift the dirt and turn straight back into gas. Nothing stays behind except the soil you remove.

What Is a Dry Ice Blasting Machine?

A dry ice blasting machine fires 2.5–3 mm CO₂ pellets at −78.5 °C in a jet of compressed air. You may also see it called a dry ice cleaning machine or dry ice blaster.

The pellets come from reclaimed CO₂. On impact they sublimate, or turn straight back into gas. No water, solvent or grit enters the stream. The only waste is the dirt you sweep up.

How Does Dry Ice Blasting Work?

Three effects act at once:

  1. Kinetic impact breaks the bond between dirt and base material.
  1. Thermal shock chills the coating fast, so grease, paint and carbon turn brittle and crack.
  1. Sublimation lift expands the CO₂ roughly 600–800 times, pushing debris out of cracks, threads and fin gaps.

Because the pellets vanish, the process is non-abrasive, dry and non-conductive. That is why it suits polished moulds, aluminium fins and electronic assemblies.

What Can a Dry Ice Blasting Machine Clean?

Anything that sits on a surface and can be shocked loose.

Industry Typical parts Soil removed Why dry ice helps
Electronics PCB / PCBA, wafer chambers, heat-sink fins Flux, solder balls, dust, resin Dry, non-conductive; reaches 1–2 mm fin gaps
Automotive Cylinder heads, pistons, manifolds, wheels Carbon, oil sludge, sealant Cleans in place; aluminium keeps its dimensions
Moulds and tooling Tyre, die-casting and stamping dies Release agent, burnt rubber Cleans in the press; polished cavities stay intact
Food, printing, coating Ovens, conveyors, rollers, ink paths Burnt grease, ink, adhesive, varnish No waste water, no sanding of roller surfaces
Heavy industry Turbine blades, wheelsets, pipework, hulls Carbon, oil coke, mill scale, paint In-situ work avoids shipping parts off site

It also reaches cavities brushes cannot, including cross-drilled holes in aluminium castings. EKM reports a 15–20% recovery in heat-transfer efficiency after fin cleaning — a typical figure from its own material, not a guarantee.

Dry Ice Blasting vs. Other Cleaning Methods

Method What it leaves behind Risk to the part Extra time
Chemical solvents Waste liquid, films, fumes Can attack seals Soaking and drying
Pressure washing Water and waste water Moisture in electrics Drying before reassembly
Abrasive blasting Spent media and dust Media embeds in soft metals Masking and clean-up
Manual scraping Rags, swarf, wipes Scratches; cannot reach blind holes Disassembly and slow labour
Dry ice blasting Only the removed dirt Non-abrasive, no moisture Usually none

Abrasive blasting still wins on heavy mill scale and on surfaces that need a rough anchor profile. Solvents win on some baked-on polymers. Dry ice blasting is a different tool, not a universal replacement.

What You Need Before You Start

  • Pellets. 2.5–3 mm, 99.9% pure, 1.2–1.56 g/cm³. Store in an insulated box and expect 5–10% sublimation loss per day.
  • Clean air. Dry, filtered and oil-free; EKM specifies ISO 8573-1 Class 3. Demand runs from 0.35–1.1 m³/min to more than 3.5 m³/min. Size the compressor with margin — weak air is the top cause of poor cleaning.
  • Power. AC 220 V single-phase, 0.37–0.8 kW. A standard workshop socket works.
  • Safety. Ear defenders, gloves and a face shield ship with the machine. At −78.5 °C, dry ice causes instant frostbite. CO₂ displaces oxygen, so ventilate; never point the nozzle at a person; isolate power before removing a hose.

How to Choose the Right Dry Ice Blasting Machine

Ask four things: soil thickness, part sensitivity, blasting time per hour, and your air supply. Feed rate is the fastest way to shortlist. A precision unit starts at 0.01 kg/min; a production unit reaches 3.0 kg/min.

Model Feed rate Hopper Air demand Supply pressure Weight Best fit
GT01 0.01–0.15 kg/min 3.3 kg 0.35–1.1 m³/min 3.5–10 bar 12 kg Hand-carried precision work, PCBs, fins
GT05 0–0.5 kg/min 5–7.5 kg >1.1 m³/min 4–10 bar 65 kg General workshop, engines, moulds
GT10 0–1.0 kg/min 12–15 kg >2.5 m³/min 4–10 bar 80 kg Daily maintenance, heavy sludge
GT20 0–2.0 kg/min 12–15 kg >2.5 m³/min 4–16 bar 85 kg Production lines, paint stripping
GT40 0–3.0 kg/min 20 kg >3.5 m³/min 4–16 bar 100 kg Continuous heavy duty, turbine blades

Pressure in bar; 1 MPa = 10 bar. EKM quotes 0.4–1.0 MPa and 0.4–1.6 MPa in its Chinese specification sheets.

Pick the GT01 for one-person precision work and the GT05 for a first workshop machine. Step up to the GT10 for daily maintenance, the GT20 for production lines, and the GT40 for continuous heavy duty.

Who Should Not Buy One

  • You need a surface profile. Dry ice will not cut a rough anchor pattern.
  • You lack dry compressed air or ventilation. Both are required; confined spaces need a CO₂ safety plan.
  • You need to cut heavy mill scale, or clean only a few parts a year. Abrasive blasting is faster; hiring a service may be cheaper.

It removes contamination, not corrosion, cracks or pitting.

Frequently Asked Questions

Is dry ice blasting abrasive?

No. Solid CO₂ is soft compared with metal and sublimates on impact. The three effects are impact, thermal shock and expansion, not cutting — so it will not round an edge or embed media.

Can dry ice blasting damage electronics?

Used correctly, no. CO₂ is non-conductive and adds no water or ionic residue. Start at 0.01 kg/min on low pressure, test a scrap board, and follow your site’s power-isolation rules.

Does dry ice blasting leave residue or moisture?

No. Pellets turn straight into CO₂ gas. Only the removed dirt remains, so parts can usually be reassembled at once.

What size air compressor do I need for dry ice blasting?

It depends on the model: >0.5 m³/min (GT01), >1.1 (GT05), >2.5 (GT10 / GT20), >3.5 (GT40). Keep air dry, filtered and oil-free, with margin above the rating.

Can dry ice blasting remove rust and paint?

It lifts paint, coatings, carbon and loose scale in layers. It does not cut metal, so rust that has eaten into the surface stays. For a white-metal finish, choose abrasive blasting.

How much does a dry ice blasting machine cost?

EKM does not publish a price list. Cost depends on the model, nozzles, destination and support package. Send your workpiece, soil and cycle time for a written quote. Compare running cost too, since air and dry ice dominate it.

The Verdict

We started with one question: how does dry ice blasting work? Three effects, one vanishing medium, no secondary waste. That makes a dry ice blasting machine a strong fit for precision parts and any job where downtime costs more than cleaning. It is a poor fit for surface profiling, deep rust or sites without clean air.

Choose by feed rate first, then check air demand, hopper size and portability. Send us your part and contaminant; we will recommend a model we can defend.

See the full EKM dry ice blasting machine range → · Read our GT01 portable unit review → · Or request a quote with your workpiece and cycle time.

EKM builds the GT01–GT40 range in Nanjing, exports to 50+ countries and is certified to ISO 9001 / 14001 / 45001. Manufacturer-supplied details.

Last updated: November 2026. Specifications from the EKM GT01–GT40 product guide and the GT01-KoolClean brochure.

Feel free to leave us a message anytime